GAZ-2332 CityVan is an experimental light commercial van (LCV class) developed at the Gorky Automobile Plant in Nizhny Novgorod. The prototype was first presented in 2006 and never entered series production.[1]
History of creation
In the mid-2000s, light commercial vehicles — the Citroën Berlingo, Renault Kangoo, Volkswagen Caddy, and others — became widespread on the global market. GAZ decided to compete with them and developed its own van in this class.[1] The Ford Transit Connect served as the benchmark during design, although, unlike it, the GAZ-2332 had rear-wheel drive rather than front-wheel drive.[2]
The prototype was presented at the Moscow International Automobile Salon in 2006. According to Sergey Batyanov, GAZ's chief designer for passenger cars, the vehicle was a "rolling mockup" built using workaround technologies, and it demonstrated the concept of a prospective family of vehicles rather than a production-ready product.[1] The vehicle was subsequently exhibited at the "Autoforum-2007" show in Nizhny Novgorod and at a number of other automotive events, and for GAZ's 75th anniversary a calendar featuring the CityVan was issued.[1]
Design
The GAZ-2332 was a two-seat van with a gross weight of up to 2,300 kg, a payload of 800 kg, and a cargo compartment volume of 3.8 m³. The prototype's body was made of fiberglass and mounted on a steel platform; the floor of the cargo compartment was covered with aluminum decking. The rear swing-out doors opened 180 degrees, and a sliding side door was also planned. The spare wheel was located under the floor.[1][2]
Overall dimensions: length — 4,500 mm, width — 1,814 mm, height — 2,000 mm, wheelbase — 2,830 mm, ground clearance — 166 mm, curb weight — 1,550 kg.[1]
The design relied heavily on commonality with GAZ production models: the kingpin-less front suspension, steering linkage, brakes, driveshaft, rear axle, and exhaust system were borrowed from the Volga; the transmission, seats, and fuel tank from the GAZelle; and the leaf-spring rear suspension from the Sobol.[1]
The prototype shown was fitted with a Chrysler 2.4 engine (2,492 cc, 101 hp at 5,200 rpm, 210 N·m of torque at 4,000 rpm, DOHC, multipoint fuel injection). In the future, installation of the ZMZ-4062 engines and the GAZ-5602 diesel (a licensed Steyr) was considered possible.[1] A later switch to a front-wheel-drive Chrysler platform or a Volkswagen platform was also under consideration.[2]
The Planned Family
CityVan was conceived as the first member of an entire family of light cargo-and-passenger vehicles built on a common platform. Besides the basic van, the plans included a seven-seat minivan and versions for use as a taxi, a mail van, an ambulance, a social-services vehicle, and a number of other specialized variants.[1][2] None of the versions entered production.
The Fate of the Prototype
The 2006 GAZ-2332 CityVan prototype is kept in a hangar of GAZ's Experimental and Prototype Works department on the plant grounds in Nizhny Novgorod. As of 2020, the vehicle sat dusty with deflated tires, alongside other unrealized prototypes from the plant.[3] The publication Drom noted that the vehicles might in time take their place in the GAZ plant museum.[3]
Sources
- drive2.ru — Unreleased/LCV, Nizhny Novgorod style — GAZ-2332 CityVan, history and analysis of the project — "History of the Automobile Industry" on DRIVE2
- pikabu.ru — GAZ-2332 "SityVan," which missed its chance at production — 01/31/25 14:00 — Pikabu
- news.drom.ru — Unique GAZ prototypes gather dust in a secret hangar (PHOTOS)
- zr.ru — 33 incredible concepts from the USSR and Russia — why they never went into production
